Home White Papers Virtual Reality Check - Phase II v1.0
Details for Virtual Reality Check - Phase II v1.0
PropertyValue
NameVirtual Reality Check - Phase II v1.0
DescriptionThis Project VRC phase 2 whitepaper focuses completely on analyzing Terminal Services (TS) workloads running  on the latest generation hardware and hypervisors. While in phase 1 of project VRC VMware ESX3.5, Citrix XenServer 5.0 and Microsoft Hyper-V 1.0 were tested on a HP DL385G5 with AMD “Barcelona” processors, this whitepaper reviews vSphere 4.0, XenServer 5.5 and Hyper-V 2.0 running on HPDL380G6 with Intel “Nehalem” processor. Project VRC made a deliberate choice not to directly compare Hypervisors in phase 1 (and published results in separate whitepapers), the community and the vendors, logically, did. Therefore, we decided that Project VRC will release this single whitepaper for the phase 2 results, including the three hypervisors. 
FilenameVirtual Reality Check - PhaseII v1.0.pdf
Filesize1.48 MB
Filetypepdf (Mime Type: application/pdf)
Creators.sanchit
Created On: 02/16/2010 08:08
ViewersEverybody
Maintained byEditor
Hits5491 Hits
Last updated on 02/15/2010 17:16
Homepage
CRC Checksum
MD5 Checksum

loginconsultants

www.loginconsultants.com

Disclaimer

All Project VRC tests are performed in a pre-configured lab environment and the results and conclusions from the whitepapers apply to this specific environment. It is therefore highly recommended to conduct tests within your own unique VDI environment.

To perform customized tests, Project VRC recommends using Login VSI: download this tool.

Login Form

Twitter

ProjectVRC: Current #ProjectVRC hardware are #HP Proliants and #HDS AMS2500 (2x) storage solution. Possible #Cisco #UCS in near future;

ProjectVRC: Yesterday the #ProjectVRC team talked about our roadmap, execution and new gear for our lab environment; #Fun #Speed #Impact

Project Virtual Reality Check©